- What is a volume vehicle inspection?
- A volume (or fleet, or bulk) vehicle inspection is one program that inspects many vehicles for one client, usually at one or a few locations: a rental lot, a dealer floor, an auction lane, a company yard. Each vehicle gets its own report, and the client gets one reconciliation spreadsheet and one invoice for the whole batch.
- How much does a fleet vehicle inspection cost per vehicle?
- It depends on the tier, the size of the program and its circumstances. The starting per-vehicle rate drops as the vehicle count rises. An Inventory Audit (VIN, plate, unit number, odometer, location, walk-around condition, photos) is starting at $69 per vehicle at 50–99 vehicles, down to $45 at 1,000+. An Audit + Condition Report (adds panel-by-panel damage, interior, tires, glass, warning lights and an OBD-II scan) is starting at $89 per vehicle at 50–99 vehicles, down to $65 at 1,000+. A Full Inspection (the same mechanical and cosmetic inspection a single buyer gets) is starting at $119 per vehicle at 50–99 vehicles, down to $85 at 1,000+. These are starting prices: every program is quoted on its lots, distances, access, vehicle types and timing. For comparison, a single-car inspection booked on its own costs $249 to $449.
- Why might my quote differ from the starting price?
- These are starting prices, not a fixed rate card. Every program is quoted on its own circumstances: the number of lots and how far apart they are, lot access and keys, vehicle types, condition, scheduling windows and rush dates can all move the final price. The bracket table shows where a typical program starts; your written quote is the price you pay.
- How do volume discounts work?
- Starting prices are set in brackets by the total number of vehicles in the program: 50–99, 100–249, 250–499, 500–999, 1,000+. Every vehicle in the program is billed at the bracket for the total, across all lots and tiers. For recurring work, the bracket is set by the vehicles in each cycle.
- Can I mix tiers in one program?
- Yes, and most programs do. A common setup is an Inventory Audit on the whole fleet and a Full Inspection on the units you plan to sell, retail or dispute. Every vehicle counts toward the bracket, whichever tier it gets.
- How long does it take to inspect hundreds of vehicles?
- It depends on the tier. The audit format is the fastest: with 2-3 inspectors per site, several hundred units fit in about a week when the vehicles are on the lot. Industry condition-report writers document 20-35 units per inspector per day. A Full Inspection takes about 45-60 minutes per vehicle, so 100 full inspections is roughly 75-100 inspector-hours, which we cover with a larger team or more days.
- Is there a minimum number of vehicles?
- Volume pricing starts at 50 vehicles in one program. For fewer than 50, ask for a quote; for one or two cars, a standard single-car booking is usually faster.
- What do I need to send for a quote?
- Lot addresses with units per lot, your inventory file (VIN, plate, unit number), the days the team can be on site, a site contact with lot and key access, roughly how many units will be out on rent if you are a rental fleet, and which emails should receive reports.
- Do inspectors need the keys?
- For the odometer reading and the OBD-II scan, yes: most vehicles only show mileage with the ignition on. The audit can still record VIN, plate, location and exterior condition without keys, and the reconciliation shows which units were read without them.
- What happens to vehicles that are out on rent or missing?
- Vehicles out on rent are marked "on rent", not "missing", and can be picked up in later batches as they return. Anything on your list that the team cannot find, anything found that is not on your list, and any VIN or odometer that does not match your records goes on the exceptions list.
- How are reports delivered?
- Each vehicle gets its own report with photos, emailed to the people you name and viewable online at its own private link. You also get a reconciliation spreadsheet with one row per vehicle and an exceptions list. Program clients can be given a private sign-in that lists every unit with its status and a CSV export.
- How does payment work?
- One invoice across every location in the program. A 50% deposit schedules the work, and the balance is due when the final report is delivered.
- Do you cover multiple cities and states?
- Yes. Vehicle Inspectors works nationwide with local inspectors, and every city in a program gets its own team, coordinated centrally. We confirm the team for each city before we commit to dates.
- Do you offer recurring or contract pricing?
- Yes. Weekly auction sales, monthly floorplan audits, quarterly fleet counts and de-fleet waves are scheduled with the same local inspectors and priced per program.
- Is a volume inspection the same as a DOT inspection?
- No. Vehicle Inspectors does not perform DOT or FMCSA annual inspections, state safety or emissions inspections, or driver DVIRs. A volume inspection documents the identity and condition of each vehicle for your records, sale, audit or dispute.
- Can I see a sample report?
- Yes. The sample at vehicleinspectors.com/samples/gold/ is a full inspection report, the same depth as the Full Inspection tier. Audit reports are shorter: identity, odometer, location, condition notes and photos.
Last reviewed 2026-10-31.